Self Contained Unit |
SC-5000 - wIth 5 HP Disposer
ALSO AVAILABLE (SC-2000 - wIth 2 HP Disposer and SC-3000 - wIth 3 HP Disposer) |
|
| |
|
Application |
|
PRE-ASSEMBLED, PRE-WIRED, PRE-PLUMBED, SELF-CONTAINED DISPOSER SYSTEM |
|
| |
|
Waste King® Exclusives |
|
• |
Easy, quick installation |
|
• |
Stand alone unit |
|
• |
Space savings (32 1/4" x 33 1/2") |
|
• |
Pre-wired disposer and control panel |
|
• |
Pre-plumbed includes vacuum breaker and solenoid valve |
|
| |
|
Features for SC-5000 |
|
• |
5 HP disposer |
|
• |
6 Ripper bars integrated with turntable and hard face beaded edge for prolonged life |
|
• |
Food waste retention shelf |
|
• |
10" diameter heavy duty cast stainless steel turntable |
|
• |
3 jam resistant hardened stainless steel swivel impellers with tungsten carbide inserts |
|
• |
Stainless steel undercutter blade |
|
• |
Cast iron grind chamber with directional feeder ridges |
|
• |
Cast iron exit chamber with water injection inlet |
|
• |
Fan cooled motor with ball bearing construction, dual voltage, and integral overload protection |
|
• |
Lifetime particle size control by non-wearing exit slots |
|
• |
Dynamically balanced for long wearing operation |
|
• |
Hard, tough cast alloy grind ring with dual stage grinding action |
|
• |
Threaded adjustable stainless steel legs |
|
• |
Hush cushion for 6" throat opening |
|
• |
High-grade 304 stainless steel used throughout table and sink assembly. All welded, ground and polished |
|
| |
|
Self-Contained Disposer System Includes: |
|
• |
1 Year Limited Disposer Warranty |
|
• |
Model 5000-3, 5 HP Dispose |
|
• |
Pre-wired Disposer and Control Panel |
|
• |
UL and CSA Listed Disposer Motor and Control Panel |
|
• |
Control Panel With NEMA 4 Enclosure Features: • Fiberglass enclosure • NEMA 4X Start & Stop Push Button Operation • Magnetic Contactor Rated At; 120 V-1 ph, 208-230 V-1 ph, 208-230 V-3 ph, 460 V-3 ph, 60 Hz • Transformer-Reconnectable. Voltage source may be 220V or 460V • Time Delay Relay For Exclusive "After Flush" action, pre-set at 180 seconds |
|
• |
Stainless Steel Table and Legs |
|
• |
Stainless Steel Leg Bracing |
|
• |
All-Weld Construction With 16 Guage, Type 304, No. 4 Finish |
|
• |
Swirl Spray Water Inlet |
|
• |
Hush Cushion With Safety/Splash Guard |
|
• |
Pre-Plumbed Vacuum Breaker and Solenoid Valve |
|
| |
|
Specifications |
|
• |
Recommended Waterflow: 7-10 GPM |
|
• |
5 HP Disposer, Model 5000-3, 1740 RPM, 3 ph, 60 Hz, 208-220/440 V - 14.0/7.0 AMPS |
|
| |
|
Options |
|
• |
Alternate 2 HP, SC-2000 and the 3 HP, SC-3000 Disposer |
|
|
To Specifiers |
| |
So that you may be assured of receiving the fine quality you expect when you specify a WASTE KING FOOD WASTE REMOVAL SYSTEM, we include the following sample specification for your convenience: |
|
|
• |
Food waste disposer shall be 5 HP, 60 Hz, 3 ph, 208-220/440 V |
|
• |
There shall be a rubber hush cushion between the disposer and the cone or sink to eliminate metal to metal contact |
|
• |
Turntable shall be of stainless steel with jam-resistant swivel impellers of hardened stainless steel with Tungsten carbide inserts |
|
• |
Table shall have stainless steel cutting blade rotating below the exit slots |
|
• |
Grind ring shall be precision ground on all cutting surfaces and shall have non-wearing size controlled exit slots |
|
• |
Disposer shall be continuous duty with totally enclosed, fan cooled motor having integral overload protection |
|
|
| |
The Waste King® Self-Contained Food Waste Disposer System is a complete stand alone system designed to be installed next to an existing sink. With either a 2 HP, 3 HP or 5 HP food waste disposer, it is perfect for all high volume waste disposal kitchens. |
| |
Features Shown are for the 5 HP, SC-5000. Some features will vary depending upon model. |
|
|
